Very transparent crib water effect resin 160 gr.

Extremely transparent water-effect epoxy resin, which can be colored with special transparent dyes that can be mixed together,

available in two sizes of 160 and 320 g (you can select the package by clicking on the drop-down menu on the "add to cart" button). In the related products located under the description, the dyes that can be inserted into the transparent resin are available.

Two-component formulation, it is supplied with the relative dose of hardener to be added at the time of use.

After hardening, the resin becomes stable and compact, characterized by high transparency and clarity.

The mixture can be poured into a hollow made in any material (polystyrene, wood, etc.) in which it self-levels, thus reproducing a mirror of water or a river.

The reaction of the mixture takes 12-16 hours to harden depending on the ambient temperature; this allows the creation of castings of considerable volume, up to 2-3 cm thick, without excessive heat developing during polymerization. When the resin is hardening, you can act in various ways to create waves, for example by blowing hot air with a hair dryer to soften the resin, or you can ripple the surface by acting with a spatula or with a clean brush.

Each pack is supplied in separate, pre-measured containers, so simply combine them.

To prepare smaller quantities, dose the resin with the hardener as expressed in the package.